  +86-577-66811193       sales@urbanpackline.com
Home / Products / Monoblock Pharmaceutical Filling Capping Machine / Automatic Suppository Production Line SJ-1LS
Share to:

Automatic Suppository Production Line SJ-1LS

The SJ-1LSautomatic suppository filling production line has a stable and efficient manufacturing process, filling, freezing, sealing and other production processes to complete the whole process, and the production capacity is 1,000-1,500 grain/hour.
Availability:
  • SJ-1LS
  • Urban

Introduction

1. working principle of the machine


The SJ-1LSautomatic suppository filling production line has a stable and efficient manufacturing process, filling, freezing, sealing and other production processes to complete the whole process, and the production capacity is 1,000-1,500 grain/hour.


 Process flow


It will be rolled into the forming area by the clamping mechanism. The mold will be heated by the preheating mold, the mold, the mold, the blow mold and the bubble forming.


 Filling


And one-time molding suppository for embedded type filling, filling accuracy + / - 2%, filling material barrel has electric heating insulation system, the top is equipped with a uniform mixing machine in order to make drugs, drug by high precision in VAT filling pump into the filling head, a drug through the other end of the cycle to rest after filling material barrel filling again next time.


 Cooling design


The suppository of the whole drainage is entered into the cooling box, and the cooling box is equipped with a cold water unit.

 Shearing


After being cooled, the solid suppository enters the sealing zone: preheating mold (preheating), sealing mould (seal), marking mould (batch number), The triangle knife will be cutting suppository top edge (cutting edge),hob (top), counting shear.


1 SJ-1LS Full-automatic Suppository Production Line is suitable for the production of special shape such as bullet head, torpedo shape and duck bill, to meet the production of your suppository. (according to the specifications of your specifications)

 

2 The equipment adopts PLC programmable control and man-machine interface operation, easy operation, convenient adjustment, accurate temperature control and smooth operation.

 

3 The temperature sensor and microcomputer control system are used to realize high precision thermostatic control.

 

4 The liquid storage tank is made of 316L stainless steel, with proper volume, heat preservation and heating function, and accurate temperature control; The tank is equipped with a mixing device to ensure the homogeneity of the liquid in the VAT at any time. The reservoir can be connected with the filling mechanism through the pipe, and the liquid can be kept in circulation to ensure the fluidity of the liquid and satisfy the demand of filling.

 

5 The insertion type linear perfusion mechanism can be used to locate accurate, not dropping, and not hanging wall; The single-grain measurement is 0.5-5ml and the filling error is plus or minus 2%.

 

6 Continuous cooling design, the post-infusion suppository shell can be fully cooled and the liquid solid transformation is realized.

 

7 Continuous strip, continuous sealing, sealing process batch number self-printing; The sealing seal should be well sealed, with neat appearance and good value of not less than 98%.

 

Simple and reasonable design, convenient operation and maintenance.

Specifications

Commodity

Automatic suppository production line

Model

SJ-1LS

Output

1000 -1500pcs/h

single dosage

0.5—5ml

Dosage allowed

<±2%

Packaging Film

PVC\PE  (thickness0.15-0.18mm)

diameter:270mm

Stirring tank capacity

20L

Air pressure

≥0.6Mpa

Air consumption/min

1.5m3/min


Water consumption/h

50kg (recycling)

Working voltage

3 phase 380V

total power

4KW

Adopt forming shapes

Bullet, torpedo and duck shapes and other shapes

Machine Weight

2000KG

Adapt Material

Synthetic fatty acid glycerol, glycerin gelatin, polyethylene glycol etc

Each distance of suppository

17.4mm

Overall dimensions

L2,300mm×W1200mm×H1,800mm




Detail图片12

图片13

图片16

图片14

图片15


Our Service

  • Through years of experience, Urban provides several services which cover almost all requirements of clients. These services include production, design, inspection, packaging, shipment, product recommendation, after-sales service,  and multiple client solutions.


  • We can supply mаsk raw materials for you if you can't buy materials from in your local market.


  • We have a good relationship with more than four international shipping companies who have rich experiences in handling different kinds of shipping ways and also the customs declarations and clearances. They all have good shipping services to save you time and costs.


  • We have a professional international technical team. To provide you with after-sales service and guidance.

After-sale Service

We will always be responsible for the machine you purchased. Nearly 10 professional after-sales personnel provide global technical services. In this way, we also provide professional services, such as guide installation services, equipment commissioning and operation services, maintenance services and equipment parts replacement. Ensure the quality of your products, while eliminating your worries.

  1. 1. The whole machine is guaranteed for 1 years.

  2. 2. Provide professional machine operation and maintenance guidelines.

  3. 4. Provide 24-hour online professional technical services .