Is engineer available to serve overseas?

A: Large punch-out (blister plate cutting) is the final cutting step before finished product output of PVC blister packaging. Process introduction: After hook hole mini punch-out, continuous long PVC blister strips are delivered to the large punch-out station. The large cutting die punches the whole blister strip according to preset outer dimension specifications, separating independent finished blister plates from the leftover PVC carrier sheet. After large punch-out cutting, complete standard-sized blister packs are sent to the finished product output conveyor for automatic collection and stacking. The traction mechanism and speed control system coordinate with large punch-out to guarantee accurate cutting size without offset or waste.

A: Mini punch-out is the intermediate punching procedure after heat sealing on blister packaging machines, also known as hook hole punching. Working flow: After PVC blister sheets finish heat sealing and pass quality inspection, the traction system pulls the sealed plate to the mini punch-out station. The punching die cuts standard retail hook holes on the top edge of each finished blister pack. These hook holes allow finished blister products to be hung on supermarket display racks, which is essential for retail commodity packaging. The mini punch-out die can be replaced to customize different hook hole sizes according to client display requirements.

A: Hot sealing (heat sealing) is the sealing process after material feeding, used to seal PVC blisters with backing paper cards to form sealed blister packs. Process flow: After all products are fully loaded into molded PVC blisters, the machine transports the PVC blister sheet with paper backing to the heat sealing station. The heating mold heats the contact surface of PVC blisters and paper cards simultaneously, then applies pressure to bond the two layers tightly by point sealing method. Point heat sealing creates continuous sealed edges around each blister cavity, completely isolating internal packaged items from external air, dust and moisture, realizing dustproof, moisture-proof and anti-falling packaging protection for products. Temperature control sensors are equipped at the heat sealing station to stabilize sealing temperature and prevent PVC over-melting.

A: Material feeding (product feeding) is the step to load packaged goods into molded PVC blisters after blister forming on blister machines. Standard process: Once the PVC sheet completes blister forming and qualified blister cavities are shaped, the automatic feeder accurately conveys packaged parts, pills, hardware or small commodities into each independent blister slot at a stable speed. For irregular, oversized, fragile or special-shaped materials that cannot be automatically arranged, the blister packaging machine reserves a manual feeding station, allowing workers to manually place products into PVC blisters flexibly, which adapts to diversified packaging production demands. Camera vision inspection can also be matched with the feeding station to check missing feeding.

A: Blister forming is the key molding process for PVC plastic sheets on blister packing machinery, adopting cam-driven positive pressure forming structure. Working principle: The upper forming mold is fixed, the cam drives the lower mold to rise to the upper limit position, tightly compressing the preheated softened PVC plastic sheet. Then the air control valve opens automatically, filtered and pressure-regulated compressed air flows into the inner cavity of the lower mold. Under stable positive air pressure, the PVC sheet fully fits the mold cavity to form customized blister cavities matching product shapes. This blister forming technology ensures consistent blister depth, smooth surface and uniform wall thickness of PVC blisters.

A: PVC preheating is the initial heating procedure of the full automatic blister pack machine, which directly determines the blister forming quality of PVC plastic sheets. Operation steps: After starting the blister packaging machine, the equipment enters the heating standby state first, then the upper and lower heating plates automatically close. The PVC plastic raw sheet is clamped between two heating plates for uniform preheating to soften the PVC material. After finishing preheating, the traction mechanism pulls the softened PVC sheet forward and sends it into the blister forming mold for the next forming process. Proper PVC preheating avoids blister cracking, uneven forming and wrinkling defects during subsequent blister molding.