GZPK series high speed tablet press is fully automatic type, the granule material will be pressed to tablet after one pair pre-press wheel and one pair main press wheel.

Generally, the granule for tablet press should meet the following requirement:

If the weight of tablet less than 0.3g, the granule should be sieved by 16~20 meshes screen.

If the weight of tablet more than 0.3g, the granule should be sieved by 10~14 meshes screen.

Liquid water content of granule should be 1%~5%.

Half-solid powder, damp powder, fine granule are not good for tablet pressing.

The GZP550 series is a sub-high speed tablet press, which compacts various granular raw materials into tablets twice by a pair of pre-press wheels and a pair of main press wheels

Applied to pharmaceutical, food, chemical, battery, electronics, ceramics and other industries to press granular raw materials into tablets

he general requirements for particles are as follows

Powder particles from 16-20 mesh screens were selected for tablets weighing less than 0.3g. Powder particles from 10-14 mesh screens were selected for tablets weighing more than 0.3g. The water content of particles is 1%~5%. Semi-solid powder, wet powder, fine powder can not be pressed or pressed forming is not good enough

This machine is suitable for pressing------ round lettering tablet

It is suitable for different shape packaging of Alu / PVC , Paper/Alu and Alu /Alu for capsule, tablet, candy, honey shape pills, disposable syringes and so on in industries of pharmaceutical, foodstuff, health product , medical instruments and etc.

This Cartoning Machine is a high-performance product that integrates machinery, light, electricity and gas, which is independently designed by our company based on the introduction of foreign advanced technology, and is manufactured strictly in accordance with the cGMP requirements of the pharmaceutical industry.

Best tablet press machine is commonly used equipment in pharmaceutical, chemical, food and other industries, in order to ensure the normal operation of equipment and production efficiency, its maintenance and maintenance is very important

high speed tablet press is fully automatic type, the granule material will be pressed to tablet after one pair pre-press wheel and one pair main press wheel.

Generally, the granule for tablet press should meet the following requirement:

If the weight of tablet less than 0.3g, the granule should be sieved by 16~20 meshes screen.

If the weight of tablet more than 0.3g, the granule should be sieved by 10~14 meshes screen.

Liquid water content of granule should be 1%~5%.

Half-solid powder, damp powder, fine granule are not good for tablet pressing.

Upon the -51/65/83series tablet press machine, there is a full-sealed tablet press room. All the parts connect to the powder are made of austenite stainless steel, non-metal parts adopt innoxiously material. All the four transparent windows can be opened to clean the machine.

Below part of the machine is sealed by stainless steel door, and there are drive equipments in it. It guarantees the safety and decrease the noise. The tablet press process including five steps, filling, measuring, pre-pressing, main-pressing and tablet discharging. The tablet press machine is fully controlled by the touch screen on the electric cabinet.

With the development of the pharmacy machine’s technology, how to improve the automatization process of pharmacy machine and the efficiency of the produce become more and more urgent. In order to meet the requirements of the pharmacy machine’s development, we design and produce a fully enclosed automatic capsule-filling machine on the basis of the former NJP-series machine. This machine’s structure, power supply controlling, vacuum and aspirate system are all ameliorated innovatively. We can say it is really the most advanced machine in the pharmacy machinery producing line. Generally speaking, it is the machine which concentrating the structure, electric and air to a body. It is the best machine for domestic pharmacy factory.

Stamping method of tablet press

Before the die device, first remove the hopper, powder feeder, feeder frame and other parts, and wipe the working face of the turntable, die holes and the installed die piece by piece, make preparations, and install according to the following steps.

The high-speed rotary tablet press is used to press various granular raw materials into round and shaped sheets, which is the basic equipment suitable for mass production. Its structure is double pressure type, with two sets of feeding devices and two sets of wheels. 33 die can be installed on the turntable, and 66 pieces can be pressed after one rotation. The speed of the rotary plate, the filling depth of the material and the thickness of the tablet can be adjusted. The mechanical buffer device on the machine can avoid damage caused by overload. The machine is equipped with a powder suction box. The suction nozzle can absorb the dust generated when the machine is moving, avoid sticking and plugging, and can recycle raw materials for reuse. Some pharmaceutical tablet press in the tablet press when the burr and dust should be matched with the screen machine at the same time dust removal (more than two times), must meet the GMP specification.