Automatic Suppository Production Line SJ-1LS
suppository filling automatic production line has a stable and efficient preheating mold, heated mold, molding, belting, canned, frozen, sealing bolt all production processes such as complete system process, grain production capacity of 18,000-23,000 / hour.
Product details
Processes:
It will be rolled up (PVC, PVC/PE) into the forming area by the preheated mold, the heating die, the mold, the blow molding and the bubble forming. The triangle-knife cutting edge (cutting edge) and the dotted line.
Cooling:
The whole irrigation and drainage install suppository into cooling box, external cooling box is equipped with water chiller, cooling air through the condenser cooling box for cooling cooling box suppository.
Sealing and shearing
Be cooled solid suppository into the sealing area: preheating mold (hot) and the sealing mould (sealing) - code mould (lot number) - hob (clip above) - > count shear.
Product parameters:
| Model | SJ-1LS |
| Output | 1,000—1，500 pcs/h |
| single dosage | 0.5—5g |
| Dosage allowed | ＜±2% |
| Packaging Film | PVC\PE (thickness0.15-0.18mm) |
| Air pressure | ≥0.6Mpa |
| Air consumption/min | 1.2m3 |
| Water consumption/h | 50kg (recycling) |
| Working voltage | 3 phase 380V |
| total power | 4KW |
| Adopt forming shapes | Bullet, torpedo and duck shapes and other shapes |
| Machine Weight | 500KG |
| Overall dimensions | L2,300mm×W1200mm×H1,800mm |
| Stirring tank capacity | 20L |
Product description
A type automatic suppository production line is suitable for the production of special shape such as bullet head, torpedo shape and duck bill, which satisfies the production of various suppositories. (according to the specifications of the mould according to the requirements of the customer)
The equipment adopts PLC programmable control and man-machine interface operation, simple operation, convenient adjustment, accurate temperature control and smooth operation.
The temperature sensor and microcomputer control system are used to achieve high precision thermostatic control.
The storage tanks are made of 316L stainless steel, which is suitable for heat preservation, heating and accurate temperature control. The tank is equipped with a mixing device to ensure the uniformity of the liquid at any time. The reservoir can be connected to the bottling organ through the pipe, and the liquid can be kept in circulation, ensuring the liquid of the liquid and satisfying the filling demand.
Adopting the insertion type line filling mechanism, the position is accurate, no drops, no wall. A single dose of 0.5 to 5ml, the filling error plus or minus 2%.
Continuous cooling pattern, the suppository casing can be fully cooled and the liquid solid conversion is achieved.
Continuous tape, continuous sealing, sealing process batch number self-printing; The sealing should be well sealed, with neat appearance and no less than 98% good quality.
