Professional pharmaceutical machines manufacturer & Exporter engaged in the pharmaceutical packaging industries - Urban Machinery

powder mixer


Powder mixer is suitable for mixing powder or granule like material in chemical, food, medicine, feed, ceramics, metallurgy and other industries.

Each has different characteristics and uses. From the mixing effect point of view, the three and double cone mixing effect is the best, but the price is more expensive, each loading is less, the V-type mixer is second, the price is moderate, and the two-dimensional mixer can load a lot of materials. However, the mixing effect is somewhat lacking compared to the previous, but in some places that do not fine mixing, it can still achieve the effect.

powder mixer  1

V-type mixer

The mixing cylinder has unique structure, uniform mixing, high efficiency and no accumulation. The whole machine has simple structure and easy operation. The outer surface and material contact parts are made of high-quality stainless steel, beautiful appearance, easy maintenance and cleaning. One end of the machine is equipped with a motor and a reducer, and the motor power is transmitted to the reducer through the belt, and the reducer is transmitted to the V-shaped bucket through the United Nations. Make the V-shaped barrel run continuously and drive the materials in the barrel to mix up, down, left and right.

Two-dimensional mixer

Two-dimensional mixer, the full name of two-dimensional motion mixer, as the name suggests, refers to the mixer that can move in two directions at the same time. The two directions of movement are respectively the rotation of the drum, and the swing of the drum with the swing frame. The mixed material rotates, turns and mixes with the drum in the drum, and at the same time, the mixing movement occurs with the swing of the drum. Under the joint action of these two movements, the material is fully mixed in a short time.

The two-dimensional mixer is composed of three parts: a drum, a swinging frame and a frame. The rotating cylinder is mounted on the swinging frame, supported by four rollers and positioned axially by two stop wheels. In the four supporting rollers, two of the transmission wheels are dragged by the rotating power system to make the rotating cylinder rotate. The swing frame is driven by a set of crank pendulum rod mechanism, the crank pendulum rod mechanism is installed on the frame, the swing frame is supported by the bearing assembly on the frame, so that the rotating cylinder is involved in the swing at the same time, so that the material in the cylinder can be fully mixed.

powder mixer  2

Three-dimensional mixer

Three-dimensional mixer is a machine that uses mechanical force and gravity to evenly mix two or more kinds of materials. Mixing machinery is widely used in various industries and daily life. The 3D mixer can combine a variety of materials into a uniform mixture, such as mixing cement, sand, gravel and water into wet concrete, etc. It can also increase the contact surface area of the material to promote chemical reactions; It can also accelerate physical changes, such as the addition of granular solutes to solvents, which can accelerate the dissolution and mixing through the role of mixing machinery. Commonly used three-dimensional mixers are divided into four categories: gas and low viscosity liquid mixers, medium and high viscosity liquid and paste mixing machinery, thermoplastic material mixers, powder and granular solid material mixing machinery.

powder mixer  3

Double cone mixer

Widely used in chemical industry, pesticides, dyes, food, feed, building materials, rare earth powder and powder (solid-liquid) mixing. The machine has a wide adaptability to mixed materials, does not overheat heat sensitive materials, does not press feed and grind granular materials, and does not produce chip segregation for materials mixed with different specific gravity and particle size; The machine can add a jacket to the outside of the mixer barrel according to the process requirements, and the material can be cooled or heated by injecting hot and cold medium into the jacket; Cooling is generally pumped into industrial water, and heating can be channeled into steam or electric heating of thermal oil.

Achema Exhibitions in Germany
Plastic Ampoule Filling Sealing Machine
recommended for you
no data
Urban Machinery company limited is a professional Exporter engaged in the research, sales and service specially for pharmaceutical packaging industries such as plastic ampoule filling, capsule tablet counting machines.
Contact Us
Copyright © 2024 Wenzhou Urban Machinery Co., Ltd. - www.urbanpackline.com | Sitemap | Privacy Policy
Customer service